Stud Boy -Snowmobile Track Stud Gauge
Zinc plated steel designed to ensure proper installation of traction products for racing purposes.
Race stud gauge comes with an explanation sheet, and convenient hole to hang on workbench.
Maximum stud height of 3/8” for oval/snow cross
Maximum stud height of ¾” for drags
Maximum wearbar height 5/8” and width 5/8”
Maximum carbide length 10”
Minimum 60º angle on carbide runner
Maximum width of backer plate - 2-1/4”
Minimum 3-3/4” traction device from edge of track
Stud Boy - Snowmobile Stud Track Templates
Easy to use snowmobile stud templates provide effective patterns for the " do-it yourselfer"
|2241-00 Trail Sled Pattern $21.99|
|2354-00 Firecat 1" Track $19.99|
|2355-00 Firecat 1.375" Track $19.99|
|2562-00 Studding template 2.86 pitch for single ply track or plus+ backers $21.99|
|2563-00 Studding template 2.86 pitch for 2 ply tracks $21.99|
Stud Boy - Snowmobile Track Hole Cutter
This track hole cutter is the fast and easy way to prepare a track to accept studs with no burning, tearing, or melting. It will leave a clean cut, properly sized hole for whichever “STUD BOY”® product you are using.
You can re-sharpen on a bench grinder, and it will work in a standard 3/8” drill.
Ease your stud installation, and save time!
2016-00 7mm T-Nut and 5/16" Push Through $11.99