|
2001 Arctic Cat Application Chart - Performance /
Aggressive
| 2001 Model |
Lug |
Track |
Stud |
Stud |
Carbide Wearbar |
Order # |
| |
Height |
Length |
Length |
Qty |
|
|
| Bearcat 550 WT |
1.000 |
20x156 |
1.000 |
124 |
Super Stock 4 |
2179-00 |
| Panther 370 |
.750 |
15x136 |
.875 |
108 |
Switch Back 6 |
2093-00 |
| Panther 440/ESR |
.750 |
15x136 |
.875 |
108 |
Switch Back 6 |
2093-00 |
| Panther 550 |
.750 |
15x136 |
.875 |
135 |
Switch Back 6 |
2093-00 |
| Pantera 600/580EFI |
.750 |
15x136 |
.875 |
135 |
G-Force 9 |
2094-00 |
| Pantera 1000 |
.750 |
15x136 |
.875 |
162 |
G-Force 9 |
2094-00 |
| Mountian Catl 500/EFI |
1.400 |
15x136 |
NA |
NA |
Switch Back 6 |
2093-00 |
| Mountian Cat 600/EFI |
2.000 |
15x136 |
NA |
NA |
Switch Back 6 |
2093-00 |
| Mountain Cat 1000/800 |
2.000 |
15x144 |
NA |
NA |
G-Force 9 |
2094-00 |
| Thundercat |
.850 |
15x121 |
1.080 |
192/240 |
G-Force 9 |
2094-00 |
| Z 120 |
.500 |
11X68 |
|
|
Switch Back 6 |
2217-00 |
| Z 370 / ES |
.750 |
15x121 |
.960 |
96/120 |
Switch Back 6 |
2093-00 |
| Z 440 / ES |
.750 |
15x121 |
.960 |
120 |
Switch Back 6 |
2093-00 |
| ZL 500 / EFI /ESR |
.850 |
15x121 |
1.000 / 1.080 |
144 |
Switch Back 6 |
2093-00 |
| ZL550/ESR |
.850 |
15x121 |
1.080 |
120/144 |
Switch Back 6 |
2093-00 |
| ZL 600 / EFI /ESR |
.850 |
15x121 |
1.080 |
168/192 |
G-Force 9 |
2094-00 |
| ZL 800/ESR |
1.000 |
15x121 |
1.080 |
192/240 |
G-Force 9 |
2094-00 |
| ZR 500 / EFI |
.850 |
15x121 |
1.080 |
120/144 |
Switch Back 6 |
2093-00 |
| ZR 600 / EFI |
.850 |
15x121 |
1.080 |
168/192 |
G-Force 9 |
2094-00 |
| ZR 800 |
1.000 |
15x121 |
1.080 |
192/240 |
G-Force 9 |
2094-00 |
| ZRT 600 |
.850 |
15x121 |
1.080 |
192 |
G-Force 9 |
2094-00 |
| ZRT 800 |
.850 |
15x121 |
1.080 |
192/240 |
G-Force 9 |
2094-00 |
*121 Tracks Have 48 Lugs / 136 Tracks Have 54 Lugs / 144
Tracks Have 57 Lugs /156 Tracks Have 62 Lugs
SB 6" = SWITCH BACK 6 "
GF 9" = G-FORCE 9"
Liberty Products, Inc. recommends that tunnel and/or heat exchanger protection
be installed in all snowmobiles when traction products are utilized. Even if
your snowmobile is equipped with factory tunnel protection we suggest that you
check for adequate clearance of traction products before you ride. Riding
without performing a clearance check can result in serious damage to your
snowmobile. Stud quantity and carbide length must be balanced for safe and
proper handling. If you are not using studs do not install overly aggressive
wearbars. We recommend our Super-Stock or Switch-Back series.
|
