 |
|
|
|
1997 Arctic Cat Application Chart -
Performance / Aggressive
| Model 1997 |
Lug |
Track |
Stud |
Stud |
Wearbar |
| |
Height |
Length |
Length |
Qty |
|
| Bearcat 340 |
.725 |
15x136 |
.875 |
96 |
Switch-Back 6 |
| Bearcat 440 |
.725 |
16x156 |
.875 |
96 |
Switch-Back 6 |
| Bearcat 550 |
.725 |
16x156 |
.875 |
96 |
Switch-Back 6 |
| Cougar |
.725 |
15x121 |
.875 |
96/120 |
Switch-Back 6 |
| Cougar MC |
.920 |
15x136 |
1.080 |
96/120 |
Switch-Back 6 |
| EXT 580 |
.725 |
15x121 |
1.000 |
120/144 |
Switch-Back 6 |
| EXT 580 DLX |
.725 |
15x121 |
1.000 |
120/144 |
Switch-Back 6 |
| EXT 600 Triple |
.725 |
15x121 |
1.000 |
144/168 |
G-Force 9 |
| Jag |
.725 |
15x121 |
.875 |
72/96 |
Switch-Back 6 |
| Jag DLX |
.725 |
15x121 |
.875 |
72/96 |
Switch-Back 6 |
| Panther 440 |
.725 |
15x136 |
.875 |
96 |
Switch-Back 6 |
| Panther 550 |
.725 |
15x136 |
.875 |
96 |
Switch-Back 6 |
| Pantera |
.725 |
15x136 |
.875 |
96/120 |
Switch-Back 6 |
| Puma |
.725 |
15x121 |
.875 |
72/96 |
Switch-Back 6 |
| Puma DLX |
.725 |
15x121 |
.875 |
72/96 |
Switch-Back 6 |
| Puma 2-UP |
.725 |
15x136 |
.875 |
96 |
Switch-Back 6 |
| Thundercat |
.725 |
15x121 |
1.000 |
192/240 |
G-Force 9 |
| Thundercat MC |
.725 |
15x136 |
1.000 |
192/240 |
G-Force 9 |
| Thundercat MC |
1.400 |
15x136 |
na |
na |
Switch-Back 6 |
| Z 440 |
.725 |
15x121 |
1.000 |
96/120 |
Switch-Back 6 |
| ZL 440 |
.725 |
15x121 |
1.000 |
96/120 |
Switch-Back 6 |
| ZR 440 |
.850 |
15x121 |
1.080 |
96/144 |
G-Force 9 |
| ZR 580 EFI |
.725 |
15x121 |
1.000 |
120/144 |
G-Force 9 |
| ZRT 600 |
.725 |
15x121 |
1.000 |
192 |
G-Force 9 |
| ZRT 800 |
.725 |
15x121 |
1.000 |
192/240 |
G-Force 9 |
Stud quantities listed are based on standard stud
patterns for 121 tracks that have 48 ribs, you will have to adjust the
stud quantity for shorter or longer tracks. (Divide track length by
2.52 then multiply by desired number of studs per lug to determine
quantity of studs required-example-136/2.52x2=108)
Liberty Products, Inc. recommends that tunnel and/or heat exchanger protection
be installed in all snowmobiles when traction products are utilized. Even if
your snowmobile is equipped with factory tunnel protection we suggest that you
check for adequate clearance of traction products before you ride. Riding
without performing a clearance check can result in serious damage to your
snowmobile. Stud quantity and carbide length must be balanced for safe and
proper handling. If you are not using studs do not install overly aggressive
wearbars. We recommend our Super-Stock or Switch-Back series.
|
|
|
|
|
|
|
Phone
(231)853-2323 / Fax
(231)-853-8012 |
|
Mailing
Address - Liberty Products Inc. P.O. Box 338 Ravenna, MI 49451-0338 |
|
Street
Address - Liberty Products Inc. 3073 Mortimer Ravenna, MI
49451-0338 |
|
© 2008 All Rights
Reserved |
|
|